Welding certification according to EN 1090

Certifications for steel and aluminum structures

Challenge:

As of summer 2014, the requirements for the manufacture of structures and structural steelwork specified in this standard will be mandatory for all manufacturers of steel and aluminum structures. This standard was originally intended to be introduced until 2012, but was postponed for a transitional period.

In addition, parts of the standard ISO 3834, EN 287 Welding tests and the availability of a welding supervisor as well as welding processes and corresponding welding power sources must be provided in addition, if you have not yet obtained them. In addition, several components must comply with an ISO 9001 and EN 3834 certification

We accompany you during the implementation of the EN 1090 certification

1. The best price for the complete processing of your Exec 2 process, which is the standard case with EN 1090, unless stated otherwise.
2. Design the process so that it can be introduced concomitantly in your process.
3. Employees who process the entire process, they go about their usual work.
4. We offer existing welding processes for machines of different types.
5. We have ready processes for MAG processes, currently only available from us. You do not have to reinvent the wheel.
6. The best offer for the EN 287 examinations and the accompaniment to obtain the certificates.
7. Offer to standardize the ISO 9001, ISO 140001, ISO 1090, EN 287 and OHSAS certification
8. Accompaniment to certification, and subsequent certifications

If a company supplies to the construction industry without a valid EN 1090, the building authority can have the component removed.
"Austrian Society for Welding Technology"

{tab Scope}

As part of the complete certification, we offer you the process by performing the following steps:

1. Preliminary talk at the company
2. Discussion of the procedure
3. Analysis of the existing special situation
4. Purchase personalized standards (can be purchased cheaply in Austria via the WKO, these are personalized)
5. Provisions of the Exec classes and declaration procedures.
6. Accompanying to the EN 287 Welding Certifications
7. Machine tests for compliance with the standard requirement
8. Reviews of the WPQR
9. Create internal documents (factory production control, ISO 9001 elements, optical control, tolerances, maintenance plans, test procedures and test instructions.
10. Support in the training or integration of welding supervision
11. Customize the production, workflow until the application of the CE mark
12. Coordination with the certification organization
13. Standards study
14. Factory set up, storage and marking of production machines, QM means and additives
15. Pre-audit
16. main audit
17. Follow-up audits

{tab Process}

• Due to the ongoing consultations we offer you the certification as "payment by certificate". ie in case of success

• We are not advisors who redesign your company, but design the EN 1090 to be operational.

• You are the experts, we support and accompany you.

• We examine the current state and implement it in EN 1090

• We make sure that the processes can be integrated into your existing system

• For this we work with technology partners: welding machine manufacturers and the best certification bodies.

{tab Advantages}

The certification according to EN 1090-1 gives you the following advantages.

• We are the only company currently offering a complete package at the best price.

• You get the welding processes for all your machines.

• Your products may be traded in the European Union

• They comply with legal requirements in the EU

• An entire European standard is introduced instead of many individual ones.

• You benefit from our know-how in terms of implementation.

{tab Requirments}

The test and warning obligation states that a contractor has to check the documents provided to him for completeness and correctness, if he can.
It is therefore not an "EN 1090 duty", but the duty of the examination of foreign documents, plans, materials, etc. in the context of a construction work.
Due to the fact that it is a harmonized standard, EN 1090 is legally binding and of course has long been regarded as a "recognized rule of technology".

The duty to inspect and warn in Austria is a duty of contractors for construction works. The obligation laid down in ÖNORM B 2110 (General Contract Terms for Works - Contract Work Standard) means that an entrepreneur must review the execution documents, instructions, materials or inputs provided by the client. The customer must be informed in writing of any defects or expected damages. If the entrepreneur fulfills his test and warning obligation, and the client instructs the unaltered execution or does not make a decision, the entrepreneur is released from his liability and warranty in the corresponding case of damage.

{tab Coexistence}

Even though there will be no real regulatory body controlling the market and the products placed on the market until the end of the coexistence period of EN 1090-1, ignoring EN 1090-2 even before the cut-off date in the event of damage is a safe break for the manufacturer ,

{/tabs}